Operating instructions

Menu Table
51
5
IPDL-C Menu
The following are the settings you can make with the “IPDL-C Menu”.
Note
❒
Italicized settings indicate default settings.
❖
1. Job Timeout
You can set how long the printer waits before terminating a print job when
the printer doesn't receive the end of that print job.
•
000 Off
• 0 (Off) to 999 seconds
❖
2. I/O Timeout
You can set how long the printer waits for more print data before ending its
waiting period for data and terminating a job.
•
300 Sec
• 0 (Off) to 999 seconds
RICOH-SCRIPT2 Menu
Settings that you can select are described below. Settings made with the printer
driver normally take priority, except when a printer driver setting is set to use
the printer's settings.
Note
❒
Italicized settings indicate default settings.
❖
Color Level
Use this setting to select the number of colors used per dot to
[
1 bit
]
,
[
2 bit
]
or
[
4
bit
]
.
•1 bit
•
2 bit
•4 bit
❖
Color Mode
Use this setting to select either monochrome or color printing.
•
Color
• Black & White
❖
Color Set (Color Setting)
Use this setting to select the correction method used for converting the RGB
data to CMYK data.
•Off
No modification to the color setting.