Service manual

Rev. 11/96
1st 2nd 3rd Display Function
Default,
( ): For Europe
Settings/Range Comments Report
5 963 Polygon Motor Power Off
Adjusts the time from after making
image on the drum until the
polygon motor current turns off.
To prolong the lifetime of the
polygon motor, you should set a
value of 30 or less.
30 0 to 60 (s)
When the polygon motor
current is off and start key is
pressed, the copy process
time is longer than when the
motor is on.
This is because it takes
more time to stabilize the
motor speed.
5 970 1 Special Ppr Select:Tray
Selects whether special paper or
standard paper is used for each
paper feed station. When you
select special, the paper transfer
corona unit is shifted to the
condition for special paper.
0 0: Normal, 1: Special
This is for the built-in paper
tray. (A166 only)
5 970 2 Type of Paper Bank-1 0 0: Normal, 1: Special
Bank 1 refers to the top tray
of the optional paper feed
unit.
5 970 3 Type of Paper Bank-2 0 0: Normal, 1: Special
Bank 2 refers to the second
tray of the optional paper
feed unit.
5 970 4 Type of Paper Bank-3 0 0: Normal, 1: Special
Bank 3 refers to the third tray
of the optional paper feed
unit (three-tray models only).
5 974 Auto Memory Call
Selects the combination for the
auto memory call.
00 to 6
For details, see the Service
Tables section. <Section 4
(1.3.9)>
5 975 3C Mode (UCR=0)
Selects whether 3C mode is used
or not. When you select 3C mode,
the image is made under the
following conditions; UCR=0, Bk=0
0 0: 4C, 1: 3C (UCR=0)
If there is a problem with the
Bk developer, this SP mode
can be set to 3C as a
temporary measure while
waiting for new Bk
developer. Bk developer will
not be used in 3C mode.
5 982 0 Oil Bnd Warn On/Off(OHP)
Determines whether the oil band
warning is displayed when the
user selects OHP mode after
more than 5 sheets smaller than
A4 size were fed in multi-copy
mode.
1 0: OFF, 1: ON
OPERATION AND SYSTEM
SM APPENDIX 11-55 A166/A187/A189
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA