Service manual

1st 2nd 3rd Display Function
Default,
( ): For Europe
Settings/Range Comments Report
5 611 1 C Ratio in Blue
Sets the toner amount ratio of
cyan in blue.
90 0 to 100 (%)
5 611 2 M Ratio in Blue
Sets the toner amount ratio of
magenta in blue.
90 0 to 100 (%)
5 611 3 C Ratio in Green
Sets the toner amount ratio of
cyan in green.
90 0 to 100 (%)
5 611 4 Y Ratio in Green
Sets the toner amount ratio of
yellow in green.
90 0 to 100 (%)
5 611 5 M Ratio in Red
Sets the toner amount ratio of
magenta in red.
90 0 to 100 (%)
5 611 6 Y Ratio In Red
Sets the toner amount ratio of
yellow in red.
75 0 to 100 (%)
5 801 RAM Clear
Resets the NV-RAM to the factory
settings except for the machine
serial No. and the main counter
values.
1: Clear (See
section 5-12.2)
5 802 1 Printer Free Run
In the printer free run mode, paper
is not fed and following are not
activated: paper transfer, paper
feed clutch, the by-pass feed
clutch, and all of the scanner
functions.
- 0: Stop, 1: Start
5 802 4 System Free Run
In the system free run mode,
paper is not fed and the following
are not activated: paper transfer,
paper feed clutches, and all of the
scanner functions.
- 0: Stop, 1: Start
5 803
1
to
32
IN:XXXXXX
(INPUT CHECK)
Displays the data received from
sensors and switches.
-0, 1
See the Service Tables
section for details.
<section 4. (1.3.6)>
5 804
1
to
54
OUT:XXXXXX
(OUTPUT CHECK)
Turns on the electrical
components individually for test
purposes.
- ON: Start, OFF: C/S
See the Service Tables
section for details.
<section 4. (1.3.7)>
OPERATION AND SYSTEM
Rev. 11/96
SM APPENDIX 11-53 A166/A187/A189
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA