Service manual

1st 2nd 3rd Display Function
Default,
( ): For Europe
Settings/Range Comments Report
5 120 Clear Md On/Off Key Cntr
Specifies whether the current
mode is cleared or not when the
key counter is removed.
0 0: Cleared, 1: Kept
5 121 Cntr Updt Tmg Key Cnter
Selects the update timing for the
key card.
0
0: Paper Feed-in
1: Paper Feed-out
For use in Japan only.
5 126 F Size Original Setting
Selects which original paper size
the machine selects when the
APS sensors detect F size.
0
0: 8 1/2 x 13, 1: 8 x 13,
2: 8 1/4 x 13
5 127 1 APS On/Off(Coin Lock)
Selects whether APS is on or not
when the machine is equipped
with a coin lock.
0 0: OFF, 1: ON For use in Japan only.
5 127 2 ACS On/Off(Coin Lock)
Selects whether ACS is on or not
when the machine is equipped
with a coin lock.
0 0: OFF, 1: ON For use in Japan only.
5 128 User Code+Coin Lock
Selects whether User Code and
Coin Lock can both be used.
0 0: Both, 1: One of them For use in Japan only.
5 129 F Size Paper Setting
Selects which copy paper size the
machine selects when the paper
size sensor or switch detects F
size.
0
0: 8 1/2 x 13, 1: 8 x 13,
2: 8 1/4 x 13
5 130 ACC On/Off:Pay Cpy Md
Selects whether ACC can be
done or not when using the key
card, the key counter, or the coin
lock. (When SP5-113 setting is
not "0".)
0
0: Possible
1: Impossible
5 302 1 Set Date and Time
Use to input the year, month,
date, hour, minute, and day in
"YYYYMMDDhhmmd" format.
1990010100001
YYYY:1990 to 2089,
MM: 01 to 12,
DD: 01 to 31,
hh: 00 to 23,
mm: 00 to 59,
d: 0 to 6 (Sun to Sat)
5 302 2 Set Date: Year Sets the year of the date. 94 1994 to 2010 (Year)
These SP modes allow you
to change individual
components of the date and
time stored with SP 5-302-1.
5 302 3 Set Date: Month Sets the month of the date. 1 1 to 12 (Month)
OPERATION AND SYSTEM
SM APPENDIX 11-51 A166/A187/A189
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA