Service manual

1st 2nd 3rd Display Function
Default,
( ): For Europe
Settings/Range Comments Report
591
Language Setting
(A189 copier only)
Selects the language used on the
operation panel display (except
for SP mode guidance)
1
1: English (NA)
2: English (EU)
3: German (EU)
4: French (EU)
5: French (NA)
6: Italian (EU)
7: Spanish (EU)
8: Danish (EU)
9: Norwegian (EU)
10: Swedish (EU)
11: Dutch (EU)
12: Portuguese (EU)
13: Czech (EU)
14: Spanish (NA)
15: Portuguese (NA)
1. When the setting is NA,
the original size detection
is set to LT/DLT version.
2. When the setting is EU,
the original size detection
is set to A4/A3 version.
5 13 Count Up/Down
Selects whether the main counter
counts up or down.
1 0: Down, 1: Up
5 19 4 * Size Setting: Tray
Sets the paper size when
selecting * size for the tray.
9 0 to 9 For use in Japan only.
5 19 15 Odd Paper Size: Default
Selects the default of the by-pass
feed station when the by-pass
feed table is opened. It can be
sideways, lengthwise, or a
non-standard paper size.
0
0: Lengthwise
1: Sideways
2: Non-standard
5 104 A3/DLT Double Count
Specifies whether the main
counter is doubled for A3/DLT
paper.
0 0: Single, 1: Double
5 111 A6/Post Card Sellection
Selects the default size when the
machine detects A6 or a smaller
paper size on the by-pass table.
0 0: Post Card, 1: A6 For used in Japan only.
5 113 Key Card / Coin Lock
Specifies whether the key card,
key counter, or coin lock is
installed or not.
0
0: No, 1: Key Card,
2: Key Counter, 3: Coin
Lock
Do not select Key Card or
Coin Lock, These are for
Japan only.
5 114 Key Card Mode Selects the mode for the key card. 7 0 to 7 For use in Japan only.
OPERATION AND SYSTEM
SM APPENDIX 11-50 A166/A187/A189
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA