Service manual

1st 2nd 3rd Display Function
Default,
( ): For Europe
Settings/Range Comments Report
OPERATION AND SYSTEM
4 303 APS Smallest Size
Selects whether the copier
determines that the original is A5
lengthwise (HLT for inch version
machines) when the APS sensors
cannot detect the original size.
0
0: No, 1:Yes
(A5 lengthwise/HLT)
If Yes is selected, paper
sizes that cannot be
detected by the APS sensors
are regarded as A5
lengthwise/HLT. If No is
selected, "Cannot detect
original size" will be
displayed.
5 1 All Indicators On
Turns on all indicators on the
operation panel.
0 ON: Start, OFF: C/S
5 4 1 ADS Priority: FC-Letter
Specifies whether the copier
defaults to ADS or manual mode
when the main switch is turned
on, an auto reset is done, the
Clear Modes key is pressed, or
when this original type or color
mode is selected.
1 0: Manual, 1: ADS For Letter mode with full color
5 4 2 ADS Pri.:FC-Photo/Auto 1 0: Manual, 1: ADS
For Photo or Auto mode with
full color
5 4 3 ADS Priority: SC-Letter 0 0: Manual, 1: ADS
For Letter mode with single
color
5 4 4 ADS Pri.:SC-Photo/Auto 0 0: Manual, 1: ADS
For Photo or Auto mode with
single color
5 4 5 ADS Priority: ACS-Letter 0 0: Manual, 1: ADS
For Letter mode with Auto
Color Selection
5 4 6 ADS Pri.:ACS-Photo/Auto 0 0: Manual, 1: ADS
For Photo or Auto Mode with
Auto Color Selection
5 7 Copier/Printer Priority
Specifies whether the machine
defaults to copier or printer mode
(if available) when the main switch
is turned on, an auto reset is
done, or the Clear Modes key is
pressed.
0
0: Copier, 1: Printer, 2:
Other Option
Do not select 2.
For the printer version only.
SCANNER
OPERATION AND SYSTEM
SM APPENDIX 11-49 A166/A187/A189
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA