Service manual

1st 2nd 3rd Display Function
Default,
( ): For Europe
Settings/Range Comments Report
4 12 1 Scanning Blnk Mrgn:Rear
Sets the blank margin for the rear
side (as viewed form the
operation side of the machine).
0.0 0.0 to 3.0 (mm)
Do not change the factory
settings.
4 12 2 Scanning Blnk Mrgn:Front
Sets the blank margin for the front
side (as viewed form the
operation side of the machine).
0.0 0.0 to 3.0 (mm)
Do not change the factory
settings.
4 12 3 Scanning Blnk Mrgn:Left
Sets the blank margin for the left
side (as viewed form the
operation side of the machine).
0.0 0.0 to 3.0 (mm)
Do not change the factory
settings.
4 12 4 Scanning Blnk Mrgn:Right
Sets the blank margin for the right
side (as viewed form the
operation side of the machine).
0.0 0.0 to 3.0 (mm)
Do not change the factory
settings.
4 13 1 Scnr Free Run (Lamp:ON)
Starts a scanner free run with the
exposure lamp on.
- ON: Start, OFF: C/S
4 13 2 Scnr Free Run (Lamp:OFF)
Starts a scanner free run with the
exposure lamp off.
- ON: Start, OFF: C/S
4 301 APS Data Confirmation
Displays the size detected with
the APS sensors as 8-bit data.
- 0 to 255
See the Service Tables
section for how to read the
displayed data.
4 417 IPU Test Ptrn Selection Selects the IPU test pattern. 0
0: Scanned Original
1: Grid and Registration Mark
2: RGB Scale and Registration Mark
3: KCMY Scale 1 and Registration Mark
4: KCMY Scale 2 and Registration Mark
5: KCMY Scale 3 and Registration Mark
6: KCMY Scale 4 and Registration Mark
4 418 1 White Conversion Thd
Sets the threshold for converting a
color to white.
30 0 to 255
If this value is increased, the
proportion of white on the
copy will increase.
4 418 2 User/Single Color Thd
Sets the threshold for converting a
color to a single color.
100 0 to 255
If this value is increased, the
proportion of single color on
the copy will increase.
SCANNER
SM APPENDIX 11-38 A166/A187/A189
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA