Service manual

ManualsBrandsSavin ManualsPrinterSDC103A

1st 2nd 3rd Display Function

Default,

( ): For Europe

Settings/Range Comments Report

3 126 Forced P-Ctrl Self Chk

Performs the forced process

control self check.

- 1: Start

Do this after replacing the

drum, unless the developer

was replaced at the same

time, in which case it can be

omitted.

3 902 1 Pointer Table No: K

Displays the current pointer table

number for each color.

0 0 to 65535

3 902 2 Pointer Table No: C 0 0 to 65535

3 902 3 Pointer Table No: M 0 0 to 65535

3 902 4 Pointer Table No: Y 0 0 to 65535

3 907 1 Sensor Pattern M/A:K Displays the current sensor

pattern M/A for each color

(calculated during toner supply

control).

- 0 to 65.535

3 907 2 Sensor Pattern M/A:C - 0 to 65.535

3 907 3 Sensor Pattern M/A:M - 0 to 65.535

3 907 4 Sensor Pattern M/A:Y - 0 to 65.535

3 910 1 Vmin: K

Displays the current Vmin for

each color.

0 0 to 655.35 (V)

3 910 2 Vmin: C 0 0 to 655.35 (V)

3 910 3 Vmin: M 0 0 to 655.35 (V)

3 910 4 Vmin: Y 0 0 to 655.35 (V)

3 932 1 Actual LD Data: K

Display the actual LD control data

for each color.

0 0 to 65535 This is based on the target

VL calculated during process

control. VL is controlled by

adjusting the LD current.

3 932 2 Actual LD Data: C 0 0 to 65535

3 932 3 Actual LD Data: M 0 0 to 65535

3 932 4 Actual LD Data: Y 0 0 to 65535

3 954 1 Image Area Ratio: K Displays the image area ratio (a

measure of the total amount of

toner on the page) for each color.

This ratio is processed in the

Printer ASIC.

- 0 to 65535 (%)

3 954 2 Image Area Ratio: C - 0 to 65535 (%)

3 954 3 Image Area Ratio: M - 0 to 65535 (%)

3 954 4 Image Area Ratio: Y - 0 to 65535 (%)

3 956 1 Act Tnr Sppy Ratio:K Displays the toner supply ratio for

each color. This ratio is updated

after every time the ID sensor

pattern is made (after every

development for each color).

- 0 to 65535 (%)

3 956 2 Act Tnr Sppy Ratio:C - 0 to 65535 (%)

3 956 3 Act Tnr Sppy Ratio:M - 0 to 65535 (%)

3 956 4 Act Tnr Sppy Ratio:Y - 0 to 65535 (%)

PROCESS CONTROL

SM APPENDIX 11-36 A166/A187/A189

CÓPIA NÃO CONTROLADA

CÓPIA NÃO CONTROLADA