Service manual

1st 2nd 3rd Display Function
Default,
( ): For Europe
Settings/Range Comments Report
3 114 1 Actual VD: K Displays the actual VD after the
process control for each color.
If this value is not within +/- 5V of
the target VD calculated by the
process control self check, this SP
mode displays the VD from the
previous process control, and this
is used by the machine.
0 0 to 65535 (V)
3 114 2 Actual VD: C 0 0 to 65535 (V)
3 114 3 Actual VD: M 0 0 to 65535 (V)
3 114 4 Actual VD: Y 0 0 to 65535 (V)
3 115 1 Actual VL: K
Displays the actual VL after
process control for each color.
0 0 to 65535 (V)
3 115 2 Actual VL: C 0 0 to 65535 (V)
3 115 3 Actual VL: M 0 0 to 65535 (V)
3 115 4 Actual VL: Y 0 0 to 65535 (V)
3 119 1 Target VD: K Displays the target VD for each
color that was calculated by the
most recent process control self
check.
0 0 to 65535 (V)
3 119 2 Target VD: C 0 0 to 65535 (V)
3 119 3 Target VD: M 0 0 to 65535 (V)
3 119 4 Target VD: Y 0 0 to 65535 (V)
3 120 1 Target VL: K Displays the target VL for each
color that was calculated by the
most recent process control self
check.
0 0 to 65535 (V)
3 120 2 Target VL: C 0 0 to 65535 (V)
3 120 3 Target VL: M 0 0 to 65535 (V)
3 120 4 Target VL: Y 0 0 to 65535 (V)
3 121 1 Development Gamma: K
Displays the gradient of the
closest straight line to the
development gamma curve for
each color.
0 0 to 655.35 These are calculated during
the development potential
calculation process (see
Detailed Descriptions -
Process Control)
3 121 2 Development Gamma: C 0 0 to 655.35
3 121 3 Development Gamma: M 0 0 to 655.35
3 121 4 Development Gamma: Y 0 0 to 655.35
3 122 1 VK: K
Displays Vk for each color.
0 -3276.8 to 3276.7
3 122 2 VK: C 0 -3276.8 to 3276.7
3 122 3 VK: M 0 -3276.8 to 3276.7
3 122 4 VK: Y 0 -3276.8 to 3276.7
3 125 Potential Control Selects the potential control mode. 0 0: Auto, 1: Fixed
Do not change the factory
setting.
PROCESS CONTROL
SM APPENDIX 11-35 A166/A187/A189
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA