Service manual

1st 2nd 3rd Display Function
Default,
( ): For Europe
Settings/Range Comments Report
2 208 5 Toner Supply Coef:K
Sets the toner supply coefficient in
fixed supply mode for each color.
5 0 to 100 (%)
Do not change the factory
settings.
2 208 6 Toner Supply Coef:C 5 0 to 100 (%)
2 208 7 Toner Supply Coef:M 5 0 to 100 (%)
2 208 8 Toner Supply Coef:Y 5 0 to 100 (%)
2 208 9 Toner Supply Mode Selects the toner supply mode. 2 0: Fixed, 1: PS, 2: Fuzzy
Do not change the factory
setting.
2 212 1 Toner Near End Thd:K
Displays the toner near end
threshold for K (M/A (mg/cm
2
)
x1000)
325 100 to 1000
Do not change the factory
settings.
2 212 2 Toner Near End Thd:CMY
Displays the toner near end
threshold for C, M, Y (M/A
(mg/cm
2
) x1000)
243 100 to 1000
Do not change the factory
settings.
2 213 1 Copies bfr Near End:K
Sets the number of copies that
can be made between toner
near-end and toner end for Bk
toner.
10 1 to 10
Do not change the factory
settings.
2 213 2 Copies bfr Near End:CMY
Sets the number of copies that
can be made between toner
near-end and toner end for color
toner.
10 1 to 10
2 225 1 Dev. Agitation: K
Agitates the developer for each
color.
-
ON: Start
Do this at installation and
after changing the developer.
<See installation procedure
in section 3.>
2 225 2 Dev. Agitation: C -
2 225 3 Dev. Agitation: M -
2 225 4 Dev. Agitation: Y -
2 225 5 Dev. Agitation: All
Agitates the developer for all
colors.
-
2 225 6 Dev. Agitation: CMY
Agitates the developer for C, M,
and Y toners.
-
2 951 Toner End Detection:K
Selects whether toner end
detection for Bk toner is on or off.
0 0: OFF, 1: ON
Do not change the factory
setting.
PROCESS CONTROL
SM APPENDIX 11-32 A166/A187/A189
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA