Service manual

1st 2nd 3rd Display Function
Default,
( ): For Europe
Settings/Range Comments Report
2 301 57 P.T.C.(Nrml-Bk/Trail)
Sets the paper transfer current for
2C and 4C mode at the leading
edge of the back side of thick
paper.
150
30 to 800 (
µ
A)
Do not change the factory
settings.
2 301 58 P.T.C.(Thk-Bk/Trail)
Sets the paper transfer current for
2C and 4C mode at the trailing
edge of the back side of thick
paper.
100
30 to 800 (
µ
A)
2 301 59 P.T.C.(1C/Nrml/Lead)
Sets the paper transfer current for
1C mode at the leading edge of
normal paper.
200
30 to 800 (
µ
A)
Do not change the factory
settings.
2 301 60 P.T.C.(1C/Thin/Lead)
Sets the paper transfer current for
1C mode at the leading edge of
thin paper.
300
30 to 800 (
µ
A)
Do not change the factory
settings.
2 301 61 P.T.C.(1C/Thk/Lead)
Sets the paper transfer current for
1C mode at the leading edge of
thick paper.
300
30 to 800 (
µ
A)
Do not change the factory
settings.
2 301 62 P.T.C.(1C/OHP/Lead)
Sets the paper transfer current for
1C mode at the leading edge of
OHP sheets.
300
30 to 800 (
µ
A)
2 301 64 P.T.C.(1C/Thin/Trail)
Sets the paper transfer current for
1C mode at the trailing edge of
thin paper.
100
30 to 800 (
µ
A)
Do not change the factory
settings.
2 301 65 P.T.C.(1C/Thk/Trail)
Sets the paper transfer current for
1C mode at the trailing edge of
thick paper.
100
30 to 800 (
µ
A)
Do not change the factory
settings.
2 301 66 P.T.C.(1C/OHP/Trail)
Sets the paper transfer current for
1C mode at the trailing edge of
OHP sheets.
100
30 to 800 (
µ
A)
2 301 67 P.T.C.(1C/Nrml-Bk/Lead)
Sets the paper transfer current for
1C mode at the leading edge of
the back side of normal paper.
400
30 to 800 (
µ
A)
Do not change the factory
settings.
2 301 68 P.T.C.(1C/Thk-Bk/Lead)
Sets the paper transfer current for
1C mode at the leading edge of
the back side of thick paper.
350
30 to 800 (
µ
A)
AROUND THE DRUM/BELT UNITS
SM APPENDIX 11-27 A166/A187/A189
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA