Service manual

1st 2nd 3rd Display Function
Default,
( ): For Europe
Settings/Range Comments Report
2 301 38 P.T.C.Sp:1/2Spd:1C
Sets the paper transfer current for
1C mode with special paper,
when the belt is at half speed.
150
30 to 800 (
µ
A)
Do not change the factory
settings.
2 301 39 P.T.C.Special:1/2Spd:2C
Sets the paper transfer current for
2C mode with special paper,
when the belt is at half speed.
250
30 to 800 (
µ
A)
2 301 40 P.T.C.Special:1/2Spd:4C
Sets the paper transfer current for
4C mode with special paper,
when the belt is at half speed.
250
30 to 800 (
µ
A)
2 301 41 P.T.C.(Bk/Nrml:1C)
Sets the paper transfer current for
1C mode with normal paper (for
the back side).
150
30 to 800 (
µ
A)
Do not change the factory
settings.
2 301 42 P.T.C.(Bk/Nrml:2C)
Sets the paper transfer current for
2C mode with normal paper (for
the back side).
250
30 to 800 (
µ
A)
2 301 43 P.T.C.(Bk/Nrml:4C)
Sets the paper transfer current for
4C mode with normal paper (for
the back side).
300
30 to 800 (
µ
A)
2 301 44 P.T.C.(Bk/Thk:1C)
Sets the paper transfer current for
1C mode with thick paper (for the
back side).
150
30 to 800 (
µ
A)
Do not change the factory
settings.
2 301 45 P.T.C.(Bk/Thk:2C)
Sets the paper transfer current for
2C mode with thick paper (for the
back side).
200
30 to 800 (
µ
A)
2 301 46 P.T.C.(Bk/Thk:4C)
Sets the paper transfer current for
4C mode with thick paper (for the
back side).
300
30 to 800 (
µ
A)
AROUND THE DRUM/BELT UNITS
SM APPENDIX 11-25 A166/A187/A189
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA