Service manual

1st 2nd 3rd Display Function
Default,
( ): For Europe
Settings/Range Comments Report
1 106 1 Pressure Roller Temp
Displays the temperature on the
surface of the central area of the
pressure roller.
x 1
0 to 200 (
°
C)
Normal range in stand-by
mode: 150 to 157
°
C
1 106 2 Hot Roller Temp
Displays the temperature on the
surface of the central area of the
hot roller.
x 1
0 to 200 (
°
C)
Normal range in stand-by
mode: 150 to 162
°
C
1 108 Fusing Unit Set
Selects whether the fusing unit is
set in the machine.
1 0: No, 1: Yes Do not adjust.
1 109 Fusing Nip Band Wdth
Measures the nip band width of
the fusing unit.
- 1: Start
See "Replacement and
Adjustment: Nip Band Width
Adjustment" for how to use
this SP mode.
1 801 1 Main Motor Speed
Adjusts the sub-scan
magnification (printer section) by
adjusting the main motor speed.
0 -1.0 to +1.0 (%)
1 801 2 Main Motor Speed: By-ps
Adjusts the sub-scan
magnification (printer section) by
adjusting the main motor speed
when printing from the by-pass
table.
0 0 to 1.0 (%)
1 901 Dplx Side Fence Position
Adjusts the position of the duplex
side fences.
0 -5.0 to +5.0 (mm)
1 902 Dplx End Fence Position
Adjusts the position of the duplex
end fence.
0 -5.0 to +5.0 (mm)
AROUND THE DRUM/BELT UNITS
2 101 1 Lead Edge Blnk Mrgn
Adjusts the blank margin at the
leading edge.
4 0 to 8.0 (mm)
2 101 2 Trail Mrgn (Nrml)
Adjusts the blank margin at the
trailing edge in normal paper
mode.
2.5 0 to 10.0 (mm)
2 101 3 Trail Mrgn (Nrml/Back)
Adjusts the blank margin at the
trailing edge for the reverse side
in normal paper mode.
5.0 0 to 10.0 (mm)
PAPER FEED/TRANSPORT/FUSING
AROUND THE DRUM/BELT UNITS
SM APPENDIX 11-22 A166/A187/A189
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA