Service manual

5.6 BIN JAM SENSOR ADJUSTMENT

After replacing the sorter main board, perform the bin jam sensor adjustment

as follows.

1. Turn on the main switch.

2. Remove any copies from the bins.

3. Set switch 5 of DIP SW 100 on the sorter main board to the ON position.

4. Turn VR 100 until LED 100 goes off.

10-Bin

Sorter Stapler

ST10 (A555)

REPLACEMENT AND ADJUSTMENT

SM 9-25 A166/A187/A189

CÓPIA NÃO CONTROLADA