Service manual

1. Copier

1. Dimensions (W x D x H):

Basic machine - 620 x 700 x 632 mm [24.4"x27.6"x25.2"] (with paper

tray unit: 620 x 700 x 1010) [24.4"x27.6"x40.1"]

Edit machine - 620 x 750 x 632 mm [24.4"x29.8"x25.2"] (with paper tray

unit: 620 x 750 x 1010) [24.4"x29.8"x40.1"]

2. The printer unit, system control unit, and scanner unit are independent

modules connected with an interface.

2. Scanner Unit

1. 400 dpi (8 bits/dot) scanning in both main and sub scan directions

2. 3-line CCD with reduction optics

3. Exposure lamp: Halogen lamp

4. 5-phase stepper motor drive

3. Drum Unit

1. The drum unit contains the photoconductor drum, charge corona unit,

and cleaning unit

2. Charge corona unit: Single scorotron charge

3. Quenching Lamp: Red LEDs

4. Drive: Synchronized with the transfer belt (dc brushless motor and

flywheel); full speed = 105 mm/s

5. Potential sensor and ID sensor included

4. Fusing and Paper Exit Section

1. Fusing: Silicone roller fusing (both hot and pressure rollers)

2. Oil application method: Double roller

3. Cleaning: Roller cleaning for the hot roller

Cleaning blade for the pressure roller

4. OHP/Thick paper mode: Half speed (52.5 mm/s)

5. Development and Toner Supply

1. Development: Two-component magnetic brush development

2. Development switching: Revolver System

3. Image density control: ID sensor and Potential sensor (Process control)

4. Toner supply

Black: Screw-in bottle (300 g)

Color: Sector cartridge (100 g)

5. Toner supply unit: Front of development unit (rotation type)

MAJOR UNIT OVERVIEW

A166/A187/A189 1-14 SM

CÓPIA NÃO CONTROLADA