Service manual

9.10 CLEANING ROLLER OIL PAN AND SCRAPER

1. Remove the fusing unit (see procedure 9.3).

2. Remove the paper exit door (see procedure 9.8).

3. Remove the cleaning roller oil pan [A] (2 screws).

4. Clean the cleaning roller oil pan and wipe it with a suitable solvent.

5. Remove the cleaning roller scraper [B] (3 screws).

6. Wipe the cleaning roller scraper with a suitable solvent.

Rev. 11/96

[A]

[B]

Replacement

and

Adjustment

PAPER TRANSPORT AND FUSING

SM 5-83 A166/A187/A189

CÓPIA NÃO CONTROLADA