Service manual

11. Disconnect the fusing thermofuse connector [A].

12. Disconnect the fusing thermistor connector [B].

13. Disconnect the connector [C] at the rear of the fusing lamp.

14. Disconnect the connector [D] at the rear of the pressure roller lamp.

15. Remove the fusing unit connector bracket [E] (2 screws and 1 E-ring).

16. Remove the fusing unit upper assembly [F] and the oil sump [G] (7

screws).

NOTE: Ensure that the fusing lamp harness is not caught when removing

the fusing unit upper assembly. A strong force erted on the harness

may damage the fusing lamp.

[E]

[C]

[D]

[B]

[A]

[F]

[G]

Replacement

and

Adjustment

PAPER TRANSPORT AND FUSING

SM 5-77 A166/A187/A189

CÓPIA NÃO CONTROLADA