Service manual

9.3 FUSING UNIT REMOVAL

CAUTION

1. Be careful when handling the fusing unit. It is hot.

2. Take care not to spill silicone oil on the floor. If silicone oil spills

on the floor, immediately clean it off with a silicone oil remover.

Silicone oil is very slippery and can cause someone to fall.

1. Remove the front cover (see procedure 1.2).

2. Remove the fusing unit stopper [A] (1 screw).

3. Hold the bottom of the fusing unit and pull it out.

[A]

PAPER TRANSPORT AND FUSING

A166/A187/A189 5-74 SM

CÓPIA NÃO CONTROLADA