Service manual

7.5 PAPER TRANSFER CORONA WIRE

1. Remove the paper transfer corona unit (see section 3. COPIER

INSTALLATION PROCEDURE).

2. Remove the end blocks [A].

3. Remove the corona wire [B].

NOTE: 1) During replacement, ensure the corona wire is threaded correctly

in the rear slot.

2) When replacing the corona wire, be sure to put the

vibration-isolating ring [C] between the slot and the end block, as

shown.

[A]

[B]

[C]

Replacement

and

Adjustment

TRANSFER BELT UNIT

SM 5-59 A166/A187/A189

CÓPIA NÃO CONTROLADA