Service manual

3.2 HALOGEN LAMP REPLACEMENT

1. Remove the exposure glass (see procedure 1.4).

2. Position the 1st scanner into the slot on the frame.

3. Push the halogen lamp terminal [A] in the direction shown. This allows

the removal of the halogen lamp [B].

4. Install a new halogen lamp in the scanner unit by the reverse procedure

of its removal.

NOTE: Do not touch the glass surface of the halogen lamp.

5. Perform the white level adjustment (SP4-435).

[B]

[A]

Replacement

and

Adjustment

SCANNER UNIT

SM 5-15 A166/A187/A189

CÓPIA NÃO CONTROLADA