Service manual

2.3 CLEANING BRUSH REPLACEMENT

1. Remove the drum unit and place it in the work area (see procedure 2.1).

2. Remove the cleaning unit (see procedure 2.2).

3. Remove and replace the cleaning brush [A] (1 screw).

NOTE: When installing the new cleaning brush, be sure to place its

notch over the pin on the cleaning unit, as shown.

4. Reinstall the drum unit by the reverse procedure of its removal.

[A]

Replacement

and

Adjustment

DRUM UNIT

SM 5-11 A166/A187/A189

CÓPIA NÃO CONTROLADA