Service manual

UP-7 ADF/Sorter Settings
No.:
Function
name
Description
Choices (range) and
specification method
1: Sorter:
Full
Color
Sorting
You can set the copier to disable the Sort/Stack
and Staple functions when you make copies in the
Full Color Copy or Auto Color Select mode.
2: ADF:
Thin
Paper
Mode
Adjusts the optional document feeder so that thin
originals (40 - 52 g/m
2
, 10.7 - 13.8 lb) will not be
damaged when they are set in the optional
document feeder.
3: SADF
Auto
Reset
Time
When you set one original at a time in the optional
document feeder, the next original is not fed
automatically if you set it in the optional document
feeder after a specified period of time. The SADF
auto reset function changes this period of time.
•
Enter a value in the
range of 5 to 60
seconds (1 second
steps).
4: ADF:
Free
Size
Setting
The optional document feeder can be programmed
to take a mixture of documents of varying sizes and
orientations.
•
Important
When using originals of different widths, put the
wider original under the narrower one. If you put
them in the wrong order, their sizes are not
detected properly.
•
It takes more time to copy originals of different
sizes and directions because the original size
must be detected for each sheet.
•
Small originals might be copied at a skew
because the guide cannot be adjusted to their
sizes.
5: ADF:
APS
Mode
with ADF
Specifies whether the machine enters the Auto
Paper Select mode automatically when originals
are placed in the optional document feeder.
6: ARDF
Auto
Sort
Mode
Specifies whether to sort copies automatically when
the number of originals and copies is two or more.
B4 A3
A4
Width
Setting paper in
the optional
document feeder
1On
2Off
1On
2Off
20 seconds
1On
2Off
1On
2Off
1On
2Off
Service
Tables
USER PROGRAM MODES
SM 4-29 A166/A187/A189
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA