Service manual

UP-6 User Code Settings
No.:
Function
name
Description
Choices (range) and
specification method
1: User
Code
Mode
(Set
account-
ing
mode)
Specifies whether to manage the copier with user
codes.
To enter the accounting mode, follow the
procedure shown below.
Enter “1” and press the
Recall/Enter
key.
If you want to manage the copier with user codes
when the color mode is set to “Full Color Copy,”
press the
Recall/Enter
key.
If you do not wish to use user codes, enter “2”
and press the
Recall/Enter
key.
Specify whether to manage the copier with user
codes when the color mode is set to “Single
Color.
Specify whether to manage the copier with user
codes when the color mode is set to “Black
Copy.”
If no user code is registered, the UP mode “3:
User code number set” is displayed automatically.
2: Key
Operator
Access
Code
Stores the key operator access code (6 digits or
less) to operate the accounting mode.
You can also register or change the key operator
access code.
When you have already registered the key
operator access code, enter it then press the
Recall/Enter key to set a new code number.
•
Enter a code number
in the range of 0 to
999999.
When you specify “1: Set” for this function, you
cannot use functions 1 to 8 in “6 Set Accounting
Mode” unless you enter the key operator access
code.
If you cannot remember your access code,
contact your service representative.
1On
2Off
1On
2Off
1On
2Off
1On
2Off
1Set
2No
USER PROGRAM MODES
A166/A187/A189 4-26 SM
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA