Service manual

2.2 UP MODE TABLE
UP-1 Default Image Settings
No.:
Function
name
Description
Choices (range) and
specification method
1: Default
photo type
(Photo
mode)
Changes the default photo type.
2: Default
photo type
(Auto
mode)
The “1: Default photo type (Photo mode)” is
specified when the Photo mode is selected with
the “Original Image Type Selection” function.
The “2: Default photo type (Auto L/P mode)” is
specified when the Auto (Letter/Photo) mode is
selected.
3: Auto Mode
Sensitivity
When in the Auto (Letter/Photo) mode, you can
select the level at which the copier identifies
whether an original is “Letter” or “Photo.”
The setting should be closer to the “Letter”
mode if letter areas are blurred or unclear, and
closer to the “Photo” mode if the edges of a
copy are blackish when copying a photograph
in which there is a wide range of image density.
4: Auto
Image
Density
The “Auto Image Density” function sets the copier
to make copies with an appropriate background
density. There are 4 levels.
The “Full Color Copy” and “Black Copy/Single
Color” modes can be adjusted separately.
Use this function to adjust the level of
background color that is erased automatically.
When you specify a darker value, dark
background colors are not erased easily. When
you specify a lighter value, dark colors are
erased easily.
5: U.C.R
Adjustment
(Black
toner
adjustment)
You can adjust the amount of black toner within 9
levels when making copies in full color.
Specify a darker level when you want to copy
letter parts clearly in black, and a lighter level if
an entire image is blackish.
1 Printed
2 Glossy
3 Copied
1 Photo
2
3
4
5
6
7
8
9 Letter
1 Full Color
2
B/W & Single Color
1 Light
2
3
4 Dark
1 Weak
2
3
4
5
6
7
8
9 Strong
USER PROGRAM MODES
A166/A187/A189 4-18 SM
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA