Service manual

1.3.5 SP5-802-4 System Free Run
Running Condition
1. Wait for the fusing unit to warm up.
2. The free run can be only performed:
•
With paper in the selected tray and will simulate copying and
scanning with A4 sideways, DLT or letter sideways paper
Process
1. The pattern for LD writing is the scanned image.
2. The free run simulates the normal copy process.
3. Paper jam detection is ignored.
4. The free run can be done in black and white mode, full color mode, or
OHP/Thick paper mode.
1.3.6 SP5-803 Input Check
SP No.
Display Sensor/Switch/Signal
Status
1st 2nd 3rd 0 1
5 803 1
IN:Tray Paper End Sn Tray Paper End Sensor Paper
present
Paper
end
5 803 2
IN:Tray Paper Size SW Tray Paper Size Switch
(See the following
table *)
0 ~ 255
5 803 3
IN:Registration Sn Registration Sensor No
paper
Paper
present
5 803 4
IN:Vertical Transport SW Vertical Transport
Switch
Closed Open
5 803 5
IN:By-ps Feed Table SW By-pass Feed Table
Switch
Closed Open
5 803 6
IN:By-ps Fd Ppr End Sn By-pass Paper End
Sensor
Paper
present
Paper
end
5 803 7
IN:By-ps Fd Ppr Width Sn By-pass Feed Paper
Width Sensor
(See the following
table )
0 ~ 255
5 803 8
IN:Relay Sensor Vertical Transport
Sensor
No
paper
Paper
present
5 803 9
IN:Exit Sensor Exit Sensor No
paper
Paper
present
5 803 10
IN:Revolver HP Sn Revolver Home
Position Sensor
Not
H.P.
H.P.
5 803 11
IN:Belt HP Sensor Transfer Belt Home
Position Sensor
Not
H.P.
H.P.
Rev. 1/97
SERVICE PROGRAM MODES
A166/A187/A189 4-4 SM
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA