Service manual

7. FILM PROJECTOR TABLE (A579)

INSTALLATION

1. Remove the following outer covers:

(1) Upper right cover

(2) Upper rear cover

2. Remove the two plastic caps [A] from the upper right cover [B] with

diagonal cutters (or other suitable cutters).

3. Form a hole [C] using a screwdriver and a M5 x 10 tapping screw

through the upper right cover [B].

4. Remove the two plastic caps [D] from the upper rear cover [E] with

diagonal cutters (or other suitable cutters).

[A]

[B]

[C]

[E]

[D]

Installation

Procedure

FILM PROJECTOR TABLE (A579) INSTALLATION

SM 3-51 A166/A187/A189

CÓPIA NÃO CONTROLADA