Service manual

3. Remove the cover caps [A] by carefully prying (or pulling) the caps from

the cover .

4. Remove the mounting frame [B] from the sorter stapler by releasing the

lever [C].

5. Remove the exit paper guide [D] from the mounting frame [B].

6. Position the hooks [E] on the sorter stapler mounting frame into the holes

[F]. Then secure using four M4x14 screws.

NOTE: Be careful not to over tighten the screw in the lower right corner,

as the mounting frame can be bent.

[A]

[C]

[B]

[D]

[B]

10-BIN SORTER (A555) INSTALLATION

A166/A187/A189 3-48 SM

CÓPIA NÃO CONTROLADA