Service manual

4.3 TRAY HEATER (OPTION)

1. Remove the rear cover [A].

2. Two-tray type: Remove the second paper tray [B] (4 screws) and the

lower front cover [C] (2 screws).

Three-tray type: Remove the second and third paper feed trays [D] (4

screws each).

3. Install the tray heaters [E] (2 screws each).

4. Install the clamper [F] and clamp the heater harnesses.

5. Install the heater bracket [G] (2 screws).

6. Connect the heater harnesses.

7. Install the clamper [H] and clamp the heater harnesses.

NOTE: After replacing the paper tray, perform the side-to-side registration

adjustment (see section 5, Replacement and Adjustment).

[E]

[F]

[A]

[D]

- Three-tray type -

[F]

[E]

[A]

[C]

[B]

- Two-tray type -

[G]

[H]

Installation

Procedure

PAPER TRAY UNIT (A549/A550) INSTALLATION

SM 3-43 A166/A187/A189

CÓPIA NÃO CONTROLADA