Service manual

NOTE: The Y toner cartridge should be installed after the Bk cartridge.

When the Bk toner cartridge is installed, the opening for the Y toner

cartridge [H] faces up.

64. Rotate the revolver until the opening for the C toner cartridge faces up and

repeat the preceding procedure. Do the same for the M toner cartridge.

NOTE: 1) To avoid forcing a cartridge into the wrong position, check the

circular color decal on the front face of the revolver.

2) When completed be certain that the revolver is positioned in the

home position (cyan at 3 o’clock, magenta at 6 o’clock, and

yellow at 9 o’clock), if not an SC can occur.

65. Reinstall the used toner tank (1 connector and 1 plastic strip clamp).

66. Reinstall the transfer belt fan (1 connector and 2 tabs).

67. Reinstall the following parts.

(1) Developer collection bottle/supply funnel ass’y (put back in its storage

location)

(2) Development roller rotation handle (put back in its storage location)

(3) Right cover

(4) Right front cover

(5) Inner cover

(6) Front door

Rev. 1/97

Installation

Procedure

COPIER INSTALLATION

SM 3-29 A166/A187/A189

CÓPIA NÃO CONTROLADA