Service manual

20. Remove the following outer covers.

(1) Right side front cover [A] (1 screw)

(2) Right side cover [B] (open the by-pass feed table [C], then remove 4

screws)

21. Remove the developer collection bottle/supply funnel ass’y [D] from its

storage location (1 screw). Then remove the development roller rotation

handle [E] from its storage location (1 screw).

[C]

[B]

[A]

[E]

[D]

COPIER INSTALLATION

A166/A187/A189 3-16 SM

CÓPIA NÃO CONTROLADA