Service manual

14. Remove the chain hook [A] from the development unit frame [B]. Then

attach the chain hook to the magnet catch [C].

NOTE: The purpose of attaching the chain hook to the magnet catch is

to help avoid forgetting to reinstall the chain hook when the

development unit is reinstalled.

15. Hold the development unit [D] as shown and remove it from the machine.

NOTE: Never hold the hopper [E] when removing the unit. Otherwise the

hopper could break or the doctor gap between the development

rollers could become uneven.

CAUTION:

Be careful not to hurt your back when holding the development unit.

Also, be careful not to drop the development unit. The development

unit weighs about 12 kg (26 lb).

[A]

[B]

[C]

[E]

[D]

COPIER INSTALLATION

A166/A187/A189 3-14 SM

CÓPIA NÃO CONTROLADA