Service manual

12. Remove the screws and connector as shown above (1 long screw, 1

screw, 1 cable clamp, and 1 connector) and slowly pull out the

development unit [A] until it is stopped by the chain [B]

13. Remove the revolver stopper [C] (1 screw).

NOTE: Keep this shipping retainer after removing it. It must be re-used if

the machine is moved to another location in the future.

[A]

[B]

[C]

Installation

Procedure

COPIER INSTALLATION

SM 3-13 A166/A187/A189

CÓPIA NÃO CONTROLADA