Fax Machine Operating Instruction

Faxing
20
2
B
Set the original.
Limitation
❒ You can send the first pages
from the exposure glass then
the remaining pages from the
Document Feeder. After you
place the last page on the expo-
sure glass, you have 60 seconds
to insert the remaining pages in
the Document Feeder.
❒ Note that you cannot place pag-
es on the exposure glass after
you have started using the Doc-
ument Feeder.
❒ Do not open the Document
Feeder while it is scanning in
originals.
Note
❒ Place the original you want to
store in memory on the expo-
sure glass or the Document
Feeder. To store multiple page
originals from the exposure
glass, set them page by page.
❒ The original can be placed at ei-
ther Document Feeder or expo-
sure glass until you press the
{Start} key.
❒ The original can be placed at
any time up until you press the
{Start} key.
Reference
P.14 “Setting Originals”
C
Select any scan settings you re-
quire. See P.27 “Scan Settings”.
D
Dial. If you wish to send the same
message to more than one desti-
nation, press the {
{{
{OK}
}}
} key and
dial another destination. Repeat
this step for all destinations.
If you make a mistake, press the
{Clear/Stop} key and enter the cor-
rect number again.
Note
❒ When specifying a destination
using a Quick Dial, the destina-
tion is added even if you did not
press {OK} key.
❒ If you do not set an original
within 30 seconds of entering a
destination fax number, the
transmission is canceled.
❒ You can change the Reset Timer
with User Tools. See Chapter 5
“Changing the Initial Setup
Transmission” in the Advanced
Features manual.
Reference
P.30 “Dialing”