Operating instructions

Settings You Can Change with User Tools

❖

❖❖

❖ Output: Document Server (Document Server)

You can specify the tray to which documents are delivered.

Note

❒ Default: Internal Tray 1

❒ For details about output trays, see p.56 “Output: Copier (copier)”.

❖

❖❖

❖ Output: Facsimile (facsimile)

You can specify the tray to which documents are delivered.

Note

❒ Default: Internal Tray 2

❒ For details about output trays, see p.56 “Output: Copier (copier)”.

❖

❖❖

❖ Output: Printer (printer)

You can specify the tray to which documents are delivered.

Note

❒ Default: Internal Tray 1

❒ The output trays set on the printer driver have priority over the output tray

specified above.

Output tray settings

Limitation

❒ You cannot interrupt the current stapling job even if a stapling job is specified

by a different function.

❒ When the 500-Sheet Finisher or 1000-Sheet finisher is installed and stapling or

shift-sorting is specified for a job, the job will be delivered to the finisher shift

tray regardless of the output tray specified.

❒ The output tray used can be changed, when a stapling job of a different func-

tion is interrupted by copying, as in the following cases:

❖

❖❖

❖ When the 500-Sheet Finisher is installed and the finisher tray is specified for the

output tray:

• The interrupting job will be delivered to Internal Tray 1.

❖

❖❖

❖ When the 1000-Sheet Finisher is installed and the finisher tray is specified for the

output tray:

• The interrupting job will be delivered to Finisher Proof Tray.

ThemisC1_EN_zentai_pre_FM.book Page 57 Thursday, June 30, 2005 8:21 PM