Operating instructions

Combined Function Operations
32
2
❒ The copying screen is displayed as default after power on. You can change
this default setting. See p.55 “Function Priority”.
-
--
-System Reset
The machine returns automatically to its initial condition when the job is fin-
ished, after a certain period of time has elapsed. This function is called “System
Reset”. See p.55 “Function Priority”.
Note
❒ You can change the System Reset time. See p.61 “System Auto Reset Timer”.
AFT041S
ThemisC1_EN_zentai_pre_FM.book Page 32 Thursday, June 30, 2005 8:21 PM