Specifications

62
Dynamic Domain Name System (DDNS) support
With Dynamic DNS, every Savin CLP37DN/CLP42DN IP address
and host name are automatically updated each time a device is
powered up. If the IP address is changed for any reason, such as
a power outage or if the unit is accidentally unplugged, a
connected PC will always be able to find the printer’s location on
the network.
IPv6 Support
Internet Protocol Version 6 (IPv6) is the next generation Internet
protocol designed by the IETF to replace the current version, IP
Version 4 (IPv4). IPv6 adds many improvements to IPv4 in areas
such as routing and network auto-configuration to simplify
device identification and discovery.
Still not sure what this means? It doesn't really matter; your customer's IT personnel will understand. All you
really need to communicate is that your Savin CLP37DN/CLP42DN supports both the IPv4 and IPv6 protocols!
Note: NetWare users must set this feature to IPv4.
Remote Operation Panel
Through Savin's Web Image Monitor (WIM)
utility administrators can reset the current
job, delete passwords and print jobs, or
reboot the device from anywhere on the
network in the event a user cannot resolve a
problem directly. Access to dozens of system
parameters such as paper supplies, user
authentication, E-mail notifications, PDL and
font settings, network security selections, and
more provide total remote device
management, so that administrators spend
more time at their desks rather than visiting
printers, MFPs, and workstations to correct
minor problems. (See Bundled Software
Utilities.)
Engineering, 4
th
Floor East