Specifications

Savin CLP37DN/CLP42DN
47
No matter how many additional 550-sheet Paper Feed Units are installed,
the Savin CLP37DN/CLP42DN always retains its compact footprint for
desktop placement.
A Tip-resistant Caster Table is available
for accounts that configure the printer
with optional PFUs and wish to place unit
on the floor. The base has wheels that
enable mobility and are designed with
side support wings for extra stability.
Another enhancement to Savin CLP37DN/CLP42DN design is the
implementation of a second heating element in the fusing unit. This
enables the printer to achieve faster output speeds than the Savin
CLP131DN by increasing the fusing temperature to melt toner into paper
more quickly. This explains the additional power consumption required by
the Savin CLP37DN/CLP42DN.
Print Controller, Memory, & Interfaces
Note:
The Savin CLP37DN can be equipped with the optional 80 GB Hard Disk Drive and additional RAM to
access user authentication and Locked Print functions, but will not support the ELP-NX function.
USB 2.0 Type A
(Standard)
USB 2.0 Type B
(Standard)
Memory/HDD
(Options for
CLP37DN only)
Optional
Interface Slot
Upper SD Card
Slot (Option)
Lower SD Card
Slot (Option)
Gigabit Ethernet
IEEE 802.11a/g
Wireless LAN
IEEE 1284/ECP
NetWare Card
HDD Overwrite
VM Card (SDK)
HDD Encryption
10/100BaseTX
(Standard)
600 MHz CPU +
Savin Controller
Architecture
CLP37DN: 384 MB
RAM Standard
CLP42DN: 768 MB
RAM + 80 GD HDD +
ELP-NX standard
PictBridge
512 MB RAM
256 MB RAM
80 GB HDD
VM Card (ELP-NX)
17.5"
25.9"