Instruction manual

WARNING
FAILURE TO CAREFULLY OBSERVE THE
FOLLOWING INSTRUCTIONS COULD
RESULT IN SEVERE EQUIPMENT DAMAGE.
735348S-001 Rev.
August 28, 2009
Figure 5
.
10. Make sure machine harness wires are away from all moving parts.
11. The installation is now complete. It is recommended that the system be tested prior to replacing any of the
copier covers. Refer to the Operator/Installation Instruction Manual for proper set up and test procedures. When the
system test is completed and verified, replace all the copier covers.
12. See table 1 for correct price settings.