Service manual

Malfunction Causes and Solutions
M000/M009 4-26 SM
4.4.3 MALFUNCTION OF THE GEAR OF THE FUSER DUE TO
MELTING
Description:
The motor breaks away from its place due to gear melting away.
Check... Solutions
Check the Heat lamp.
1. Replace the Fuser.
2. Replace the main board.
3. Replace the SMPS.
4.4.4 PAPER EMPTY
Description:
The status LED on the operation panel is on even when paper is loaded in the cassette.
Check... Solutions
1. Bending or deformation of the actuator
of the paper sensor.
2. The main board is defective
3. Check the connector.
1. Replace the defective actuator.
2. Replace the empty sensor main board.
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA