Service manual

Discharge Symptoms, Causes, and Solutions
SM 4-19 M000/M009
Trouble-
shooting
4.3.3 JAM 1
Description:
1. Recording paper is jammed in front of or inside the fuser.
2. Recording paper is stuck in the discharge roller and in the fuser just after passing
through the Actuator-Feed.
Symptom and Cause Solution
1. If paper is jammed in front of or inside
the fuser.
2. If the recording paper is stuck in the
discharge roller and the fuser just after
passing through the Actuator-Feed,
Feed Actuator may be defective.
1. Replace the SMPS or Exit-Sensor.
2. Replace the main board.
3. Reassemble the Actuator-Feed and
Spring-Actuator if the movement is
bad.
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA