Service manual

Symptoms, Causes, and Solutions of Bad Images
M000/M009 4-12 SM
4.2.11 GHOST (3): FUSER
Description:
Ghost occurs at 62.8 mm or 77.6mm intervals.
Symptom and Cause Solution
The temperature of the fuser is maintained
at a high temperature.
Disassemble the fuser and remove the
contaminated toner particles on the roller,
and clean out the foreign matter between
the thermistor and heat roller.
(Caution: can be deformed)
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA