Service manual

Symptoms, Causes, and Solutions of Bad Images

SM 4-11 M000/M009

Trouble-

shooting

4.2.10 GHOST (2)

Description:

Ghost occurs at 75.5 mm intervals of the OPC drum on all pages of print jobs. (When

printing on card stock or transparencies using manual feeder)

Symptom and Cause Solution

When printing on card stock thicker than

normal paper or transparencies such as

OHP, higher transfer voltage is required.

Select Card stock or OHP Film on paper

type menu from the software application

setting. After using, it is recommended that

the mode should be returned to the original

setting.

CÓPIA NÃO CONTROLADA