Service manual

HVPS/SMPS/Main Board

M000/M009 3-10 SM

3.6 HVPS/SMPS/MAIN BOARD

3.6.1 HVPS (HIGH VOLTAGE POWER SUPPLY)

1. Before removing the HVPS, you should remove:

 Top cover ( Top cover).

 Right cover ( Left and Right cover).

2. Remove the six screws indicated above.

3. Disconnect the harness [B] at the back side of the HVPS [A].

4. Remove HVPS.

 The Serial Number will be erased after replacing the main board.

5. Input the Serial Number ( Serial Number Input).

CÓPIA NÃO CONTROLADA