Service manual

Disregarding this warning may cause bodily injury

1. Be careful with the high temperature part.

The fuser unit works at a high temperature. Use caution when working on the printer.

Wait for the fuser to cool down before disassembly.

2. Do not put fingers or hair into the rotating parts.

When operating a printer, do not put hand or hair into the rotating parts (Paper feeding

entrance, motor, fan, etc.). If do so, you may get harm.

3. When you move the printer.

This printer weighs 7.87kg. Use safe lifting and handling techniques. Use the lifting

handles located on each side of the machine. Back injury could be caused if you do not

lift carefully.

4. Ensure the printer is installed safely.

Ensure the printer is installed on a level surface, capable of supporting its weight.

Failure to do so could cause the printer to tip or fall, possibly causing personal injury or

damaging the printer.

5. Do not install the printer on a sloping or unstable surface.

After installation, double check that the printer is stable.

CÓPIA NÃO CONTROLADA