Service manual

Firmware Download

M000/M009 5-2 SM

7. Run the "usblist2.exe" and “firmware file”.

 In Command prompt, type " usblist2.exe XXX" and press enter key. XXX indicates

the firmware name as shown above.

 Do not turn off the machine during the firmware upgrading.

WIM (Web Image Monitor) mode

Program (firmware) for this machine can be upgraded by connecting to a PC through

Network.You must save the correct firmware file to the PC.

1. Print out the Configuration page for back up the data and setting.

2. Download the Firmware on the PC.

3. Access the “WIM” with the correct IP address.

4. Select "Maintenance" [A] as shown above.

5. Make sure that "Firmware Upgrade" [B] is selected as shown above. If not, select it.

6. Click the "Browse" button [C] and select the Printer Firmware file you have saved in the

PC.

CÓPIA NÃO CONTROLADA