Service manual

Firmware Download
SM 5-1 M000/M009
Service
Tables
5. SERVICE TABLES
5.1 FIRMWARE DOWNLOAD
5.1.1 DOWNLOAD PROCEDURE
There are two ways to upgrade the machine firmware.
1. Command Prompt
2. WIM (Web Image Monitor)
Connect the machine to a PC with the USB “Command Prompt” or through the network for
“WIM” before you do the firmware upgrade procedure.
It is very rare to lose data and settings after the program has downloaded. However you
should print out the Configuration page list before you start the download procedure.
DOS Command Mode
Program (firmware) for this machine can be upgraded by connecting to a PC via a USB
cable. A Command to upgrade the program must be entered.
You must save the correct firmware file to the PC.
1. Print out the Configuration page for back up the data and setting.
2. Download the "usblist2.exe" file and “firmware file” to the PC.
3. Connect the PC and the machine with a USB cable.
4. Turn on the main power of the machine.
5. Open the DOS command window.
6. Enter the directly where you have already downloaded the firmware.
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA