Setup guide

Server Settings
29
3
Web Settings
Make settings for the web server.
• When using a web server, Web set-
tings need to be set. When using a
computer as a web server and de-
livery server, select the [Use the
same computer for the Web server and
delivery server.] check box.
• When you do not use URL hyper-
links, select the [Make URL hyper-
links inactive in e-mail text] check box.
Set I/O Device
This controls configuration of net-
work devices. This can be found in
[Set I/O Device] under the [Server]
menu. Not all devices need to be con-
figured.
Network devices can be installed in
the following ways:
• Setting their IP addresses
• Setting their host names
❖
❖❖
❖ Basic Settings
Specify the network device name.
❖
❖❖
❖ Delivery Settings
Make the following settings for de-
livery:
• Whether to use the delivery fea-
ture
• Device destination list settings
• Each fax port settings
• Fax operation settings
• Output operation settings
Note
❒ For information about available
network devices which require set-
tings in [Set I/O Device], see the
ScanRouter V2 Professional/En-
terprise Readme or Compatible
Device List.
❒ [I/O Device List] displays a list of the
network devices on the network.
❒ You can add multiple network de-
vices.
❒ Click [Properties] to see remaining
disk space and change settings.
Set Delivery Feature Defaults
This controls default delivery options
and is found in [Set Delivery Feature De-
faults] under the [Server] menu.
Undelivered Data
This controls how undelivered docu-
ments are handled.
• Set a save-for period to have docu-
ments deleted after they are no
longer needed.
• A sender can be notified by mail of
a transfer failure.
Note
❒ Notification of a sender identifica-
tion error is not sent.
Fax Backup Settings
You can forward all documents re-
ceived by fax to specified destina-
tions. A document that is saved in an
in-tray can be viewed even if it has a
Confidential ID or TSI. Make sure
that an administrator password is set
for the in-tray where documents are
forwarded so that clients cannot have
access to it.