Setup guide

Server Settings
27
3
Server Settings
The following options and settings
are available with administrator
mode on the server.
Note
❒ Information such as available disk
space and server condition can be
found under [Server Information] in
the [Server] menu.
Select Server
When you start ScanRouter V2 Ad-
ministration Utility without having a
particular delivery server specified,
or when you want to switch to anoth-
er delivery server, you can select a
server from [Select Server] on the
[Server] menu.
Set Administrator
To change the administrator pass-
word or the method of error notifica-
tion, change the settings for the
administrator. To make the adminis-
trator settings, click [Set Administrator]
in the [Server] menu.
❖
❖❖
❖ Administrator Password
Make settings for the administra-
tor password.
❖
❖❖
❖ Error Notification
As a method of error notification,
click [Ignore], [Mail administrator], or
[Output to printer]. When [Mail admin-
istrator] is clicked, specify the ad-
ministrator mail address. When
[Output to printer] is clicked, make
settings in [Output printer].
❖
❖❖
❖ Administrator Mail Address
When the administrator mail ad-
dress is set, notification required
for delivery system maintenance
and operation such as insufficient
disk space and error notification
are sent to the administrator.
❖
❖❖
❖ Output Printer
Select a printer from [Output print-
er]. [Output printer] displays the
printers that are ready to operate
on the delivery server. One printer
can be selected.
❖
❖❖
❖ Allowing modifications of settings
from other than the administrator
Specify whether to allow destina-
tion modification from DeskTop-
Binder V2.
Note
❒ When [Mail administrator] is selected
in the [Error Notification], an error
notification, undelivered report,
delivery failure report and insuffi-
cient disk space report will be sent
to the e-mail address specified
here.
❒ When [Mail administrator] is clicked,
notification on a mail delivery fail-
ure is output to the printer.