Setup guide

Network Administrator Duties
17
2
Preparation for delivery operation
Several settings are required before
delivery can begin.
❖
❖❖
❖ Adding Destinations
Set destinations for users first.
Registered users can be selected
into groups. Appropriate delivery
settings must be made for each
destination.
Reference
⇒ p.32 “Destinations”
❖
❖❖
❖ Registering a TSI
When delivering documents re-
ceived by fax, a TSI of a facsimile at
the sending point and forwarding
destination must be registered in
the TSI table. The TSI table makes a
facsimile TSI relate to forwarding
destinations.
Reference
⇒ p.38 “Administering TSI
Codes”
❖
❖❖
❖ Adding e-mail addresses
If you add e-mail addresses to Mail
Address Book, these addresses can
be used for adding destinations.
Reference
⇒ p.39 “Administering Mail
Address Book”
❖
❖❖
❖ Limiting the Log Entry
Set the maximum log entry for the
delivery and error logs.
Reference
⇒ p.41 “Log Administration”
Launching/Quitting the
Delivery Server
Launching and quitting
❖
❖❖
❖ Launching the Delivery Server
Turn on the power to the delivery
server and start Windows. Server
start-up varies with your installa-
tion options.
❖
❖❖
❖ Quitting the Delivery Server
When turning off or restarting the
delivery server, suspend delivery
service first, then shut down Win-
dows and turn off the computer.
Starting delivery service
Delivery service can be started from
the [Server] menu of ScanRouter V2
Administration Utility or when the
delivery server starts up, delivery ser-
vice is to be started as set during in-
stallation.
❖
❖❖
❖ Launch at Startup
When you log into Windows using
the ScanRouter V2 Administration
Utility starting account, delivery
service will automatically begin.
❖
❖❖
❖ Launch from Program Folder
To start delivery service manually,
select [Resume Services] from the
[Server] menu.
Note
❒ To suspend delivery service, se-
lect [Suspend Services] from the
[Server] menu.
Reference
⇒ p.26 “Suspending and Re-
suming Service”