Setup guide

15
2. Using the Delivery System
Network Administrator Duties
There are several things that the net-
work administrator must do before
bringing the delivery server in opera-
tion. Daily maintenance is required
after the server is brought in opera-
tion. The network administrator must
also be ready to deal with any prob-
lems that arise.
Constant maintenance of the network
is required to ensure that all clients
have convenient access to the deliv-
ery service.
Note
❒ Use the ScanRouter V2 Adminis-
tration Utility to manage the net-
work and maintain optimal
performance settings.
Before You Start
Before the system is usable, the envi-
ronment and other settings must be
configured.
Reference
For assistance with the installation,
see Help.
Global settings
Before opening the system for use,
global settings for the environment,
network devices and delivery fea-
tures must be configured.
❖
❖❖
❖ Setting Administrator Password and
Error Notification
Set the administrator password
and error notification.
• Administrator password
The administrator password is
used to control access to the
ScanRouter V2 Administration
Utility. To access ScanRouter V2
Administration Utility to make
settings and for management,
the administrator password is
required.
A default administrator pass-
word is not set.
The administrator password is
requested only when the Scan-
Router V2 Administration Utili-
ty is launched. If the password
is entered at startup, it is not re-
quested until shutdown.
An administrator password is
set for each sever. If you have a
system with more than one de-
livery server, you will need to
set passwords individually for
each server.
• Error Notification
Select the method of notification
when an error occurs.
• Mail Address
When the administrator mail
address is set, notification re-
quired for delivery system
maintenance and operation
such as insufficient disk space
and error notification are sent to
the administrator.
• Allow modification of settings
This function specifies whether
to allow destination modifica-
tion from DeskTopBinder V2.
Reference
⇒ p.27 “Set Administrator”